| 75081A Franke Slewing Ring Bearings | ba:31.75 mm; H:182.166 mm; P60°:61.4 kN; Cap bolt:2 x 5/8-11 UNC; Max. speed for PosiTrac Plus seal:1450 r/min; RG:3/8 NPT; H1:95.25 mm; db:100.013 mm; End plug (suffix Y):EPR 13; P90°:36.9 kN; Da:149.873 mm; PosiTrac Plus contact element (dc shaft position):B10724-64; L:330.2 mm; Ca:45.796 mm; Housing:FSAF 217; J1:53.975 mm; Cap bolt recommended tightening torque:149.1 N·m; da:85 mm; |
| 26 1091 01 Rollix Slewing Ring Bearings | Dynamic Load Rating (kN):5.1; Seals or Shields:Open Type; Clearance:C3; Weight:0.02 KGS; D:30mm; Fatigue Load Rating (kN):--; Limiting Speed Rating (r/min):24000; Cage Type:Steel; Availability:In Stock; SKU:6200/c3-koyo; d:10mm; Static Load Rating (kN):2.4; B:9mm; Reference Speed Rating (r/min):--; |
| 31 1091 01 Rollix Slewing Ring Bearings | Cage Type:Steel; Reference Speed Rating (r/min):6800; Fatigue Load Rating (kN):2.24; d:60mm; Clearance:C3; Dynamic Load Rating (kN):52; Limiting Speed Rating (r/min):6000; Weight:0.81 KGS; Static Load Rating (kN):36; Seals or Shields:Single Metal Shield; B:22mm; D:110mm; SKU:6212-z-c3-fag; Availability:In Stock; |
| 35 0741 01 Rollix Slewing Ring Bearings | Mass inner ring:0.025 kg; B:17 mm; d:28 mm; r, r1,2 min.:0.3 mm; F:32 mm; |
| 39 0741 01 Rollix Slewing Ring Bearings | Seals or Shields:Two Rubber Seals; SKU:2209k-2rstn-nsk; Oil Limiting Speed (r/min):8500; d:45mm; Static Load Rating (kN):8.15; Availability:In Stock; Weight:0.02 KGS; Grease Limiting Speed (r/min):7100; Clearance:Standard; B:23mm; Dynamic Load Rating (kN):23.3; Cage Type:Plastic; D:85mm; |
| 35 0541 01 Rollix Slewing Ring Bearings | Clearance:Standard; d:15mm; Oil Limiting Speed (r/min):70000; Cage Type:Plastic; Weight:0.02 KGS; Preload:Medium; SKU:7202ctrdump3-nsk; Static Load Rating (kN):4.55; D:35mm; Availability:In Stock; Dynamic Load Rating (kN):8.65; Grease Limiting Speed (r/min):46000; B:11mm; Seals or Shields:Open Type; |
| 2 082 Rollix Slewing Ring Bearings | L:419.1 mm; Initial grease fill:379.89 g; RG:1/2 NPT; Pa:20.7 kN; P120°:72.5 kN; P90°:111 kN; Max. speed for PosiTrac Plus seal:1350 r/min; h:46.831 mm; Housing:SAF 524; PosiTrac Plus contact element:2 x B10724-113; Cap bolt, SAE grade:5; P60°:185 kN; S:4.763 mm; H2:53.975 mm; Labyrinth ring:2 x LOR 112; P150°:66.7 kN; R1:79.375 mm; Da:215.001 mm; da:104.775 mm; J min.:336.55 mm; |
| 29 0841 01 Rollix Slewing Ring Bearings | Weight:0.48 KGS; Dynamic Load Rating (kN):33.5; D:80mm; d:35mm; Limiting Speed Rating (r/min):5600; SKU:6307-rsr-c3-fag; Seals or Shields:Single Rubber Seal; Static Load Rating (kN):19; Fatigue Load Rating (kN):1.25; Clearance:C3; B:21mm; Cage Type:Steel; Availability:In Stock; |
| 75056A Franke Slewing Ring Bearings | Clearance:C3; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; Availability:In Stock; Static Load Rating (kN):2.85; SKU:6002-2rsh/c3gjn-skf; Dynamic Load Rating (kN):5.85; d:15mm; Fatigue Load Rating (kN):0.12; D:32mm; B:9mm; Condition:New; Limiting Speed Rating (r/min):15000; Cage Type:Steel; |
| 1 105 Rollix Slewing Ring Bearings | Dynamic Load Rating (kN):251; Clearance:Standard; B:65mm; Minimum Load Factor:1.9; Cage Type:Brass; Reference Speed Rating (r/min):1300; d:75mm; Seals or Shields:Open Type; Limiting Speed Rating (r/min):1800; Fatigue Load Rating (kN):20.8; Static Load Rating (kN):610; Availability:In Stock; Weight:6.75 KGS; SKU:51415m-skf; D:160mm; |
| 21 0541 01 Rollix Slewing Ring Bearings | D:40mm; SKU:52204-qbl; Availability:In Stock; Clearance:Standard; Seals or Shields:Open Type; B:26mm; Cage Type:Steel; d:15mm; Weight:0.15 KGS; |
| 2 1715 Rollix Slewing Ring Bearings | Oil:8 400 min-1; d:45 mm; Grease:7 100 min-1; Weight:0.828 kg; B:25 mm; da:52 min; Dynamic (Cr):52.804 kN; rs:1.5 mm; Static (Cor):31.715 kN; Pu:1.442 kN; D:100 mm; Bearing designation:6309 ; ra:1.5 max; Da:91 max; |
| 6 1250 21 Rollix Slewing Ring Bearings | B:0.2813 Inch; Seals or Shields:Open Type; D:1.375 Inch; SKU:klnj5/8-rhp; d:0.625 Inch; Availability:In Stock; Clearance:Standard; Weight:0.20 KGS; |
| 35 0641 01 Rollix Slewing Ring Bearings | D:180 mm; with tapered bore:1 400 min-1; Oil:92.620 kN; Grease:849 kN; Dynamic (Cr):3 mm; B:69 mm; rs (min):2 mm; d:110 mm; Static (Cor):5.5 mm; with cylindrical bore:1 000 min-1; Pu:501 kN; |