| DODGE NSTU-GT-40M Take Up Unit Bearings | Shaft Size Type:Imperial; e - Geometry Factor:0.24; Dimension E:7.60 in; Housing Style:Round Flange; Oil Lubrication - T Seal:2000 rpm; Dimension H:1.13 in; Dimension D:5.13 in; Dimension BC:10.75 in; Dimension L Exp:3.32 in; Float:0.083 in; |
| DODGE 69972 Mounted Units & Inserts | F:44 mm; Da max:65 mm; nB:7400 1/min / Referen; ra max:1 mm; nG:12300 1/min / Limiti; dc min:50 mm; da min:39 mm; Bearing number:NUP2207-E-TVP2; r1 min:0,6 mm; Cr:73000 N / Dynamic lo; |
| DODGE F4B-SXR-55M Flange Block Bearings | Bearing number:LMF8LUU; H:5 mm; L:45 mm; Basic dynamic load rating (C):0,43 kN; Weight:0,053 Kg; D1:32 mm; d1:3,4 mm; d2:6,5 mm; d:8 mm; Brand:Samick; |
| DODGE WSTU-SXV-203 Take Up Unit Bearings | Full Timken Part Number:QMSN15J211SB; Dimension S:3.62 in; Dimension L:3.86 in; Dimension C:4.02 in; Shaft Size :2-11/16 in; Bearing Number:22215; Y1 - Geometry Factor:3.14; Dimension R:0.24 in; e - Geometry Factor:0.22; Pre Install Clearance Max:0.0031 in; |
| DODGE FC-IP-304L Flange Block Bearings | Basic dynamic load rating (C):156 kN; Outer Diameter (mm):140; Basic static load rating (C0):382 kN; Width (mm):44; D1:82 mm; H:44 mm; d1:140 mm; Brand:ISB; D:140 mm; Weight:2,7 Kg; |
| 1.125 Inch | 28.575 Millimeter x 1.609 Inch | 40.869 Millimeter x 1.625 Inch | 41.275 Millimeter DODGE P2B-GT-102 Pillow Block Bearings | Bearing number:21308 KCW33+AH308; Size (mm):1.125 Inch | 28.575 Millimeter x 1.609 Inch | 40.869 Millimeter x 1.625 Inch | 41.275 Millimeter ; B2:6 mm; Bore Diameter (mm):40; d1:35 mm; B:23 mm; D:90 mm; Width (mm):23; Outer Diameter (mm):90; d:40 mm; |
| DODGE CYL-LT10-108 Cartridge Unit Bearings | ID Chamfer Length (Ci):0.600; Bearing Outside Diameter, Nominal(Do):200.000; Material:Wrapped bronze with; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Shaft Dia., Nominal (d):195.0000; Brand:AST; ID Chamfer Angle (B deg.):45; Housing Bore Dia. (Dh) - 200 +0.046 / -0:200 +0.046 / 0; Bearing number:ASTT90 19590; Shaft Size (ds) - 195 -0.170 / -0.216:195 0.170 / 0.216; |
| DODGE F2B-DL-104 Flange Block Bearings | Bore Diameter (mm):22,2; Bearing number:KIT-102; Size (mm):22.2x50.8x20.3; d:22,2 mm; Brand:RHP; Outer Diameter (mm):50,8; D:50,8 mm; Width (mm):20,3; B:20,3 mm; |