| DODGE P2B-LTB7-106 Mounted Units & Inserts | Calculation factor f1:1; d1:45,5 mm; r2 min.:1 mm; r3 min.:0,6 mm; Db max.:58.8 mm; ra max.:1 mm; Db max:58,8 mm; Bore Diameter (mm):35; D2:53.38 mm; Basic static load rating C0:8.3 kN; |
| DODGE WSTU-SXV-203 Take Up Unit Bearings | Full Timken Part Number:QMSN15J211SB; Dimension S:3.62 in; Dimension L:3.86 in; Dimension C:4.02 in; Shaft Size :2-11/16 in; Bearing Number:22215; Y1 - Geometry Factor:3.14; Dimension R:0.24 in; e - Geometry Factor:0.22; Pre Install Clearance Max:0.0031 in; |
| DODGE CYL-SC-105 Cartridge Unit Bearings | Basic static load rating (C0):424 kN; Outer Diameter (mm):340; Angle (α):15 °; Size (mm):190x340x55; Width (mm):55; D:340 mm; Bore Diameter (mm):190; a:63 mm; d:190 mm; Bearing number:7238 C; |
| DODGE SFC-IP-300R Flange Block Bearings | Weight / Kilogram:0.267; Weight / LBS:0.511; Category:Single Row Ball Bear; Manufacturer Item Number:6305/65; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:4.39 Hz; Outside Diameter:2.559 Inch | 65 Mill; Inventory:0.0; C:17,000 mm; Enclosure:Open; |
| DODGE FC-E-104R Flange Block Bearings | Db(max):-; B1:-; C0r:263; db(max):93; ra(max):2; da(min):86; d:75 mm; D:160 mm; Size (mm):75x160x37; Grease lub.:3700; |
| DODGE F2B-DL-104 Flange Block Bearings | Bore Diameter (mm):22,2; Bearing number:KIT-102; Size (mm):22.2x50.8x20.3; d:22,2 mm; Brand:RHP; Outer Diameter (mm):50,8; D:50,8 mm; Width (mm):20,3; B:20,3 mm; |
| DODGE F2B-SCM-40M Flange Block Bearings | d:60 mm; B:28 mm; Outer Diameter (mm):110; Bore Diameter (mm):60; Brand:FAG; rmin:1,5 mm; Size (mm):60x110x28; Width (mm):28; Da max:101 mm; D:110 mm; |
| DODGE F2B-SXV-30M Flange Block Bearings | Basic static load rating (C0):30,5 kN; Bearing number:6014-Z; B:20 mm; Basic dynamic load rating (C):38,5 kN; Outer Diameter (mm):110; d:70 mm; Size (mm):70x110x20; Weight:0,6 Kg; D:110 mm; Brand:CYSD; |